Máy in nhũ, máy in ruy băng lụa ST-23

---

Giá:Liên hệ

Loại sản phẩm:Máy in nhũ, máy in ruy băng lụa

Lượt xem:2313

Máy in nhũ, máy in ruy băng lụa ST-23

ST-23 A Hot foil stamping maching machinene for personalized leather notebook covers.

Manual handling the pieces, the whole process of automatic process, steel base, stamping process smooth, vertical pressure, from the dark indentation, hot stamping on paper ,leather, plastic, wood ,etc.

Máy in nhũ, máy in ruy băng lụa ST-23

ST-23 A Hot foil stamping maching machinene for personalized leather notebook covers

Manual handling the pieces, the whole process of automatic process, steel base, stamping process smooth, vertical pressure, from the dark indentation, hot stamping on paper ,leather, plastic, wood ,etc.

Category	Bronzing   area (mm)
A	300*400
B	400*400
C	400*500
D	400*600

Technical parameters:

Power	220V 50HZ
Hot plate size	400 * 600mm
Table Size	800*520mm
Max Stamping pressure	15T
Plateform stroke	200mm
Vertical stroke	70 mm
Heating power	3000W
Motor power	40W
Feeding	Motor Drive
Stamping temperature range	room temperature 0-300 ° C
Gas supply pressure	0.6-0.8mpa
Printing speed	About 1800 pieces/hour
Weight	280kg
Dimension	600*700*820mm

Advantages:
1, Relay control run;
2, The heating temperature of the thermostat temperature set;
3, Cylinder power, leverage design, strong pressure;
4, Stamping pressure, temperature, speed adjustable;
5, The table can be down adjustment;
6, With security guards;
Stamping process the matters needing attention:

(1). According to the different varieties of scalded object, select the appropriate hot stamping foil.  Good sized must master the temperature, pressure, stamping speed three party coordination, and   according to the short-run printing materials, area of difference.

(2). The cutting knife should grasp the direction and speed of car;

(3). The anodized hot stamping foil should choose attributes suitable paper, ink (especially black

ink), kerosene, composite glue, hot stamping parts must be kept dry, so as to avoid the bronzing

layer oxidizing or injury;

(4). The general packaging: 0, 64 × 120m volumes, each volume 10: a box can be custom width of

0.64M, length of 240m or 360m rolls or other special specifications;

(5). When stored to prevent pressure, moisture, heat, sunscreen, placed in a cool ventilated place.

Công ty chúng tôi rất hân hạnh được phục vụ quý khách hàng .

Địa chỉ : Số 2010 -CT3A - KĐT Văn Quán - Hà Đông - Hà Nội.

Tell : 04 35666727 - 0912666817 - 0912817066.